OPERATING INSTRUCTIONS
Step 1
Connect the high pressure hose to the unit’s high pressure outlet.
Step 2
Connect water supply hose to unit’s water inlet.
5
Step 3
Connect water supply hose to the cold water source and turn water on completely.
Step 4
Plug the power cord into the power outlet. Unlock the lock of the trigger gun.
Step 5 Trigger the gun to eliminate trapped air, wait for a steady flow of water to emerge from the spray nozzle.
Step 6
Turn on the pressure washer (ON). NOTE: This unit is equipped with a pressure switch. The motor only starts up when the trigger on the gun is pulled. The motor shuts off when the trigger is released.
