ASSEMBLY INSTRUCTIONS
Step 1 Slide the handle through the accessory rack.
Step 2 Align the holes of the accessory rack to the handle and fasten the four (4) screws.
3
Step 3 Check oil level. Oil level should always be between the “FULL” and “ADD” marks on the dipstick. Be sure the machine is level when checking the oil level. (Refer to the engine’s operating manual for seasonal grades.)
Step 4 Insert the detergent tray into one of the slots of your choice and screw in the fastener. Fill with the proper detergent for your cleaning project.
Important! Do not run the engine with a high or low oil level as this can cause engine damage. If you have further questions regarding the engine, please refer to the engine’s operating manual included with the unit.
You are now ready to operate your Karcher Pressure Washer.
Step 5 Fill gas tank with unleaded gasoline. Do not use leaded gasoline.
