OPERATING INSTRUCTIONS
NOTE: Engines controls shown may appear different.
Step 1 Connect the high pressure hose to the unit’s high pressure outlet.
Step 2 Insert the Vario spray wand into the gun. Push in and turn clock- wise to lock spray wand in place.
Step 3 Connect garden hose to unit’s water inlet.
4
Step 4 Connect garden | Step 5 Trigger the gun to | ||
hose to the cold water | eliminate trapped air, wait for a steady | ||
source and turn water on | flow of water to emerge | ||
completely. | from the spray nozzle. | ||
|
|
|
|
|
|
|
|
Step 6 Model K 1800 IB:
Slide the throttle control to the fast position. Then push primer ball three times. Wait 3 seconds between each push.
Note: in cold weather push 5 times
Step 7 Pull the starter handle. If the engine fails to start after 3 pulls squeeze the trigger gun to release pres- sure, and repeat step 7.
Step 6 Model K 2200 IB: Slide the throttle con- trol to the fast position. Thenmove the choke lever to the “CHOKE” position (only if engine is cool).After starting, move the choke to “RUN”.
