23
FINISHING
|
| FLANGE |
| DOOR OPENING AND |
| HOOD | CLIP | CLOSING: The upper lou- | ||
|
|
|
| vres must be removed to |
|
|
|
| allow the door to be opened |
|
|
|
| or closed. To access the |
UPPERLOUVRE |
| lower door latch, open the | ||
|
|
|
| valve control door. Release |
|
|
|
| the top and bottom door |
|
|
| DOOR LATCH | latches, located at the right |
|
|
| ||
aFIGURE
A
HOOD
BRACKETSLOTbLOUVREcLOWER LOUVRES (VALVE CONTROL DOOR)
TO INSTALL THE UPPER LOUVRES: Insert the upper louvres into the slots on both brackets. Press the top flange of the hood into the four clips located along the top of the unit as shown.
TO INSTALL THE LOWER LOUVRE ASSEMBLY: Attach each hinge to the fire- box with 2 screws.
B
C
HINGE SCREEN
d
A CLIPS
FLANGE
C E N T R E
SLOT
HOOD
Attach the hood by pressing the top flange into the clips along the top of the louvre opening. Secure using a screw through the centre slot.
Position the hinge screen into place and with the control door open, secure to the firebox using three screws.
Optional plated door trim, and arched door facia are available at your local Napoleon dealer.
SLOT
TA B
B
Insert the louvre tabs into the slots located at the top left and right corners of the unit.
C
HINGE
CLIP
SLOT
Insert the hinge clips into the slots located at the bottom left and right corners of the unit.
To remove the louvres, pull the back tabs of the clips forward, while pushing the louvre assembly back. Lift the clip.