Charging the Battery

The battery comes with a sufficient charge to complete the setup process and activate your phone. After activation, we recommend charging your device for three and a half hours to give it a full charge. See “Maximizing Battery Life” on page 18 for tips on maximizing the life of your device’s battery.

1.Plug the AC charger into a wall outlet.

2.Connect the charger cable to the charger jack on the bottom of the device. Make sure the arrow on the connector is facing up, toward your device’s screen.

3.To confirm that your device is charging, check the indicator light.

Red indicates that your device is charging.

Green indicates that your device is fully charged.

Indicator Light

If the battery is fully drained, it may take a few moments for the indicator light to turn on while the battery is charging.

Device Setup

Section 1A: Device Setup

15

Page 25
Image 25
Palm PTR690HKP manual Charging the Battery, Indicator Light