Palm PTR690HKP manual Using Sprint Voice Command, Setting Up Your Personal Address Book

Using Sprint Voice Command

If you subscribe to the Sprint Voice Command service, you can call a number by just saying a name. (There is a monthly charge for this service.)

To activate Sprint Voice Command, you must speak to a Sprint Customer Service representative:

1.Make sure your phone is turned on (see “Turning Your Device’s Phone On and Off” on page 55).

2.Press Phone

.

3.Press *, press 2, and then press Talk to contact Sprint Customer Service and sign up.

Setting Up Your Personal Address Book

To use Sprint Voice Command, you must first set up your personal address book.

1.From the Main view of the Phone application, press *, and then press Talk . Follow the system prompts. (You’ll hear a tone, followed by the prompt “Ready.”)

2.Say “Add Name” to begin setting up your Personal Address Book, and then follow the voice prompts.

Making a Call With Sprint Voice Command

1.From the Main view of the Phone application, press *, and then press Talk . (You’ll hear a tone followed by the prompt “Ready.”)

2.After the prompt, say “Call” and the name you’ve assigned to the number you want to call. (Your request repeats and you are asked to verify it.)

3.Say “Yes” to dial the call. Say “No” to cancel.

74 Section 2B: Phone Features