Palm PTR690HKP manual Receiving Beamed Information, Managing Files 261

4.Select the Beam From pick list and select whether the application you want to beam is located on your Centro device or on an expansion card.

5.Select the application you want to transfer, and then select Beam.

6.When the Beam Status dialog box appears, point the IR port on your Centro device directly at the IR port of the receiving device.

7.Wait for the Beam Status dialog box to indicate that the transfer is complete before you continue using your Centro device.

Note:	Please note that there may be restrictions that prevent you from
	transferring copies of an application to a third party. It is your
	responsibility to ensure that you have obtained the legal right to provide
	a copy to the third party and to honor any restrictions imposed by the
	software licensors.

Receiving Beamed Information

1.Turn on your screen.

2.Select the beam command on the transmitting device.

3.Point the IR port on your Centro device directly at the IR port of the transmitting device to open the Beam Status dialog box.

4.When the Beam Status dialog box appears, select a category or expansion card. (If you don’t select a category, the item goes into the Unfiled category.)

5.Select Yes to receive the information or No to refuse it.

Managing Files

Section 6A: Managing Files 261