Palm PTR690HKP manual Setting Up VersaMail to Work With Other Providers, 127

Setting Up VersaMail to Work With Other Providers

1.Press Applications and select Email to open the VersaMail application.

Tip:	The first time you set up the VersaMail application, you are asked if you
	want to continue with account setup after you open the application.
	Select Continue and go to step 3.

2.Press Menu , select Accounts, select Account Setup, and then select New.

3.In the Email Address field, enter your email address.

4.In the Password field, enter your email account password.

5.Select Next.

6.Select the Mail Type pick list, and then select POP, IMAP, or Outlook Mail (EAS) (based on the information you got from your system administrator or ISP).

7.Enter the username you use to access your email.

Tip:	Your username can be either the part of your email address appearing
	before the @ symbol or your entire email address. Check with your email
	provider if you are not sure what username to enter.

8.Enter the names of your incoming and outgoing mail servers.

9.Select Done to finish setup and go to the inbox of the account you set up, where you can begin getting and sending email. (If your system administrator or ISP provided the port number or security settings, select Advanced and enter those settings.)

Email

Section 3B: Email 127