Replacing the Battery

Your Centro device comes with a replaceable battery. Be sure to use a battery that is approved by Sprint and that is compatible with your device. Failure to use the proper battery may result in personal injury or product damage, and it voids your device warranty.

1.Press Power/End to turn off the screen.

2.Gently press down on the Battery Door, and then slide the door downward to remove it from your device.

3.Place a finger in the notch next to the battery and lift the battery up at a 45-degree angle to remove it from the compartment.

4.Align the metal contacts on the new battery with the contacts inside the battery compartment.

Battery Door

Battery

Contacts

 

Device

 

Contacts

Notch

 

5.Insert the new battery into the compartment at a 45-degree angle, pressing it into place. Slide the battery door onto the back of the device until it clicks into place.

6.Connect your device to the charger or sync cable.

7.Wait for your device to turn on, and then enable the network time or set the date and time when prompted.

Help

Section 7A: Help

307

Page 317
Image 317
Palm PTR690HKP manual Replacing the Battery, Battery Door Contacts Device, Notch, Help 307