Palm PTR690HKP manual Using Flash Mode

Using Flash Mode

Flash mode provides an alternate way to manage your calls while one or more calls are active. For example, you can dial another call, swap between calls, or join two calls in a conference session with the press of a button while in Flash mode.

1.Press Talk from Active Call view.

2.If the Do you want to switch to Flash mode? prompt appears, select Yes.

3.While in Flash mode, do any of the following:

■If you have one call in progress and you answer an

incoming second call, press Talk to swap between the calls.

■If you have one call in progress, to make an outgoing

second call, dial the number using any of the methods described in “Making Calls” on page 57.

■If you have one call in progress and you place an outgoing second call, press

Talk after establishing a connection with the second party to set up a conference session using three-way calling.

■If you have two calls in conference, press Talk to hang up one of the calls; you can then dial another number and include the new caller in the conference session.

Note:	Pressing Talk during a conference call usually hangs up the second call.
	However, depending on your network connection, you may occasionally
	hang up the first call.

4.To exit Flash mode and end all the calls, press Power/End .

Phone Features

Section 2B: Phone Features 73