Palm PTR690HKP manual Inserting the Battery, BatteryDoor, Battery Compartment Device Contacts

Inserting the Battery

WARNING:	Use only Sprint-approved or manufacturer-approved batteries and
	chargers with your device. The failure to use a Sprint-approved or
	manufacturer-approved battery and charger may increase the risk of
	your device overheating, catching fire, or exploding, which may result in
	serious bodily injury, death, or property damage.

1.Gently press down on the Battery Door, and then slide the door downward to remove it from your device.

BatteryDoor Battery Contacts

Battery

Compartment

Device Contacts

2.Align the battery contacts with the contacts inside the device compartment.

3.Insert the battery into the compartment at a 45-degree angle, and then press it into place.

4.Slide the battery door onto the back of the device until it clicks into place.

5.Follow the onscreen instructions to set up your device.

Device Setup

Section 1A: Device Setup 13