Assembly Instructions, Operating Instructions

ASSEMBLY INSTRUCTIONS

Screwdriver, small size (not supplied) for connecting high pressure hose and trigger gun.

ÎSTEP 1:

Insert the steering rollers and lock them.

ÎSTEP 2:

Insert wheels into the side holes of the unit.

ÎSTEP 3:

Fix the VELCRO® fastener to the ap- pliance.

ÎSTEP 4:

APull out the locking slide of the trigger gun handle.

BInsert the small end of the high pres- sure hose into place.

CPush the locking slide back into the trigger gun to lock the hose in posi- tion.

ÎSTEP 1:

Connect the high pressure hose to the unit’s high pressure outlet.

ÎSTEP 2:

Insert the spray wand of your choice into the trigger gun. Press in against the spring tension and twist into locked position.

6English

Image 6

Contents

20 M High Pressure Washer Operator Manual Safety Alert SymbolsSpecifications Owner/User Responsibility Model Overview Important Safety Instructions Gun Kicks Back Hold with both hands Servicing of a Double Insulated Product Water Supply Cold Water Only Operating Instructions Assembly InstructionsAssembly Required tools Do not use if above test fails Using the Accessories Spray wandDirtblaster Working with Detergents Always Use Kärcher Detergent for Best Results Shutting Down & CLEAN-UP Taking a Break ..five minutes or more Care and Maintenance Instructions Cleaning the water inlet filter MaintenanceWinterizing and LONG-TERM Storage House Siding Cleaning TipsDeck Cleaning Cement Patios, Brick and Stone Patio & Lawn Furniture Optional Cleaning Accessories25 Ft. Extension /Replacement High-Pressure Hose Pump Guard Wide Area Surface Cleaner Soft Clean Washing Brush25 ft. Pipe Cleaning Kit bayonet Rotating Wash Brush bayonet Troubleshooting Symptom Cause Solution USA / Canada México