Karcher K 2.20 M Working With Detergents, Detergents can only be applied at low pressure, Î Step

WORKING WITH DETERGENTS

Detergents can only be applied at low pressure.

A low-pressure jet is generated if no spray wand is attached to the trigger gun.

ÎSTEP 1:

Fill a container with Kärcher deter- gent. Place the filter end of detergent suction tube into the container.

For best results see Cleaning Tips for specific information on how to clean different surfaces.

Always Use Kärcher® Detergent for

Best Results

Kärcher® biodegradable detergents are specially formulated to protect the envi- ronment and your pressure washer. The special formula won’t clog the suction tube filter and will protect the internal parts of the pressure washer for a longer life. For Kärcher® Detergents, check your retailer or visit our website: www.soappac.com

ÎSTEP 2:

Detach spray wand from the trigger gun.

ÎSTEP 3:

Turn on the pressure washer (I). Pull trigger to operate unit. Liquid deter- gent is drawn into the unit and mixed with water. Apply detergent to work area. Do not allow detergent to dry on surface.

ÎSTEP 4:

To rinse, insert the spray wand and pull trigger to operate unit.

ÎSTEP 5:

Cleaning up: Always draw fresh wa- ter through the detergent tank or si- phon tube when done to flush any remaining detergents from the injec- tion system.

￿CAUTION Never use:

– Bleach, Chlorine products and other corrosive chemicals

– Liquids containing solvents (i.e., paint thinners, gasoline, oils)

– Tri-sodium phosphate products

– Ammonia products

– Acid-based products

These chemicals will harm the unit and will damage the surface being cleaned.

Use of these items will void the war- ranty.

English 9