Karcher K 2.27 Care And Maintenance Instructions, Cleaning Tips, Cleaning the water inlet filter

CARE AND MAINTENANCE

INSTRUCTIONS

Cleaning the water inlet filter

STEP 1:

Disconect the connector from the water inlet.

STEP 2:

Pull out water inlet filter with flat-nose pliers.

STEP 3:

Rinse out water inlet filter in warm water.

STEP 4:

Reinsert water inlet filter into the wa- ter inlet.

Maintenance

The unit is maintenance-free.

CLEANING TIPS

￿CAUTION

Before cleaning any surface an in- conspicuous area should be cleaned to test spray pattern and distance for maximum cleaning results.

If painted surfaces are peeling or chipping, use extreme caution as pressure washer may remove the loose paint from the surface.

When using on surfaces which might come in contact with food, flush sur- faces with plenty of drinking water.

For additional cleaning tips and a complete video library, visit our web- site: www.karcherresidential.com

Deck Cleaning

(with or without detergent). Pre-rinse deck and surrounding area with fresh water. If using detergent, apply to sur- face at low pressure. For best results, limit your work area to smaller sections of approximately 25 square feet. Allow detergent to remain on surface 1-3 min- utes. Do not allow detergent to dry on surface. Rinse at high pressure in a long sweeping motion keeping the spray noz- zle approximately 3-6 inches from the cleaning surface. Always clean from top to bottom and from left to right. When moving on to a new section of the clean- ing surface, be sure to overlap the previ- ous section to eliminate stop marks and ensure a more even cleaning result.

House Siding

(with or without detergent). Pre-rinse cleaning surface with fresh water. If us- ing detergent, apply to surface at low pressure (for best results, limit your work area to sections of approximately 6 feet and always apply detergent from

10English