ASSEMBLY INSTRUCTIONS
Assembly
ÎSTEP 1:
Insert wheels into the body of the unit.
ÎSTEP 2:
Slide the transport handle into place.
Î STEP 3:
Install the supplied connector to the unit’s water inlet.
Note: Never attach the garden hose connector to the 
unit’s water inlet!
ÎSTEP 4:
Fasten the quick connect to the high pressure outlet.
ÎSTEP 5:
Insert one end of the high pressure hose into the trigger gun until it locks audibly.
Note: Make sure the connection nip- ple is aligned correctly. Check the connection by pulling on the high pressure hose.
Check the secure connection by pull- ing on the high pressure hose.
Disconnect:
ÎPress the disconnect key on the trig- ger gun and remove the high pres- sure hose from the trigger gun.
OPERATING INSTRUCTIONS
ÎSTEP 1:
Insert one end of the high pressure hose tightly into the quick connect on the unit, it will lock in audibly.
Note: Make sure the connection nip- ple is aligned correctly. Check the connection by pulling on the high pressure hose.
Check the secure connection by pull- ing on the high pressure hose.
6English
