WORKING WITH DETERGENTS

Detergents can only be applied at low pressure (Min.).

"STEP 1:

Install the Vario Power Spray Wand. Set the spray wand to the low pres- sure setting (Min.).

"STEP 2:

Fill a container with Kärcher deter- gent. Place the filter end of detergent suction tube into the container.

" STEP 3:

Turn on the pressure washer (I). Pull trigger to operate unit: Liquid deter- gent is drawn into the unit and mixed with water. Apply detergent to work area. Do not allow detergent to dry on surface.

"STEP 4:

Always draw fresh water through the detergent suction tube when done, to rinse/flush any remaining detergents from the injection sys- tem.

For best results see Cleaning Tips for specific information on how to clean different surfaces.

￿CAUTION

This unit has been designed for use with cleaning detergents recommended by the manufacturer. The use of other cleaning detergents may affect the op- eration of the machine and void the war- ranty.

Always Use Kärcher Detergent for Best Results

Kärcher biodegradable detergents are specially formulated to protect the envi- ronment and your pressure washer. The special formula won’t clog the suction tube filter and will protect the internal parts of the pressure washer for a long- er life. For Kärcher Detergents, check your retailer or visit our website: www.karcher-usa.com/home

The following Kärcher detergents are available:

One Gallon ready to use

!All Purpose & Vehicle Cleaner

!Deck & Patio Cleaner

!Heavy Duty Degreaser

!Exterior House Cleaner

￿CAUTION

Never use:

– Bleach, Chlorine products and other corrosive chemicals

– Liquids containing solvents (i.e., paint thinners, gasoline, oils)

Tri-sodium phosphate products

– Ammonia products

Acid-based products

These chemicals will harm the unit and will damage the surface being cleaned.

8English

Page 8
Image 8
Karcher K 2.55 Working with Detergents, Detergents can only be applied at low pressure Min Step, One Gallon ready to use