Karcher K 2300 G specifications TROUBLESHOOTING - continued, page, 537-4129

Models: K 2300 G

1 12
Download 12 pages 46.51 Kb
Page 12
Image 12
TROUBLESHOOTING - continued

TROUBLESHOOTING - continued

 

 

Symptom

 

Cause

 

Solution

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

No detergent.

 

Detergent suction tube not

 

 

Check connection.

 

 

 

 

properly connected to the

 

 

 

 

 

 

 

 

machine.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Detergent is too thick.

 

 

Dilute detergent, for best results

 

 

 

 

 

 

 

 

use Kärcher detergent.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Open the filter by turning it to the

 

 

 

 

The filter on is closed.

 

 

 

 

 

 

 

 

 

desired detergent intake.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Filter on detergent suction

 

 

Run warm water through filter to

 

 

 

 

tube is clogged.

 

 

remove debris.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Damaged or clogged

 

 

Remove obstruction or replace

 

 

 

 

detergent suction tube.

 

 

detergent suction tube.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Spray nozzle is in high

 

 

Turn spray nozzle tip to ”CHEM”

 

 

 

 

pressure position.

 

 

position.

 

 

 

 

 

 

 

 

 

 

11

 

 

 

Discharge nozzle is

 

 

Blow out or remove debris with a

 

 

 

obstructed.

 

 

fine needle.

page

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Garden hose

 

Loose fitting.

 

 

Tighten fittings.

537-4129

 

 

 

 

 

connection leaks.

 

 

 

 

 

 

 

 

 

Missing/worn rubber washer.

 

 

Insert new washer.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Triple jet nozzle or

 

Nozzle or spray wand not

 

 

Tighten connections

-

 

Spray wand leaks.

 

properly attached.

 

 

 

 

￿￿1 800

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Broken “o”-ring.

 

 

Call Kärcher customer service

 

 

 

 

 

 

 

 

hotline and order o”-ring.

 

 

 

 

 

 

 

 

 

 

 

 

Pump is noisy.

 

Pump is sucking air.

 

 

Check that hoses and fittings are air

 

 

 

 

 

 

 

 

tight. Turn off machine and purge

 

 

 

 

 

 

 

 

pump by squeezing trigger gun until

 

 

 

 

 

 

 

 

a steady flow of water emerges

 

 

 

 

 

 

 

 

through the nozzle.

 

 

 

 

 

 

 

 

 

 

 

 

Water leaks from

 

Loose fittings.

 

 

Check that all fittings are tight.

 

 

pump (up to 10 drops

 

 

 

 

 

 

 

 

 

 

Thermal protection device

 

 

Thermal protection device will

 

 

per minute

 

 

 

 

 

is permissible).

 

has been activated.

 

 

automatically reset.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Water seals are damaged

 

 

Call service center.

 

 

 

 

or worn.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Oil Drip.

 

Oil seals are damaged or

 

 

Call service center.

 

 

 

 

worn.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If you encounter any additional

 

 

 

 

 

 

 

 

difficulties not listed, please call

 

 

 

 

 

 

 

 

our service center for help.

 

 

 

 

 

 

 

 

Karcher Customer Support USA

 

 

 

 

 

 

1-800- 537-4129

 

Page 12
Image 12
Karcher K 2300 G specifications TROUBLESHOOTING - continued, page, 537-4129