GFCI INSTRUCTIONS
Step 1 Plug the Ground Fault Circuit Interrupter (GFCI) into a working outlet
Note:
The actual appearance of the GFCI may be different from this illustration.
Step 2 Press “TEST”, then press “RESET” to assure proper connection to power.
USING THE ACCESSORIES
High/low spray wand |
| Dirtblaster® spray wand |
6
The High/low spray wand allows you to adjust the cleaning pressure. To clean at maximum pressure, the High/low wand must be positioned to the high pressure setting (+).
To apply detergent, the wand must be positioned to the low pressure setting
For higher pressure turn wand
tip to the plus (+) position.
This wand features a 0º pencil jet which rotates 360º for maximum dirt cutting action, effectively increasing cleaning performance up to 50%. This wand combines the cleaning performance of a 0º pencil jet with the surface coverage of a wide angle nozzle. Not recommended for soft materials, siding, painted surfaces, decks or autos.
For lower pressure turn wand tip to the minus
Warning
TO AVOID SERIOUS INJURY, NEVER POINT SPRAY NOZZLE AT YOURSELF, OTHER PERSONS OR ANIMALS
