OPERATING INSTRUCTIONS
Step 1
Connect the high pressure hose to the unit’s high pressure outlet.
Step 3
Connect garden hose to unit’s water inlet.
Step 5
Plug the power cord into the power outlet. Unlock the lock of the trigger gun. Press “TEST”, then press “RESET” to assure proper connection to power. Trigger the gun to eliminate trapped air, wait for a steady flow of water to emerge from the spray nozzle.
Step 2 Insert the spray wand of your choice into the wand extension. Push in and turn clockwise to lock spray wand in place.
5
Step 4
Connect garden hose to the cold water source and turn water on completely.
Step 6
Turn on the pressure washer (ON).
The motor starts only if the trigger of the gun is pulled and shuts off when the trigger is released.
