Install the dosage regulator for de- tergent
STEP 3:
Insert detergent suction tube onto the hose fitting.
Install the dosage regulator and connect using 2 screws.
Note: During installation you must make sure that the tongues of the dosage regulator match up with the intended recesses in the casing.
Connect the high pressure hose to the hand spray gun
STEP 4:
Push the high pressure hose into the trigger gun until it locks audibly. Note: Make sure the connection nipple is aligned correctly.
Check the secure connection by pulling on the high pressure hose.
Disconnect:
Press the disconnect key on the trigger gun and remove the high pressure hose from the trigger gun.
English 7
