Install the transport handle
STEP 4:
Place the transport handle into the intake until you feel resistance. Use the heel of your hand or a soft rub- ber mallet to position it.
STEP 5: |
To push the appliance, the trans- port handle must be pulled all the way up; it will lock into place audi- bly.
Connect the high pressure hose to the hand spray gun
STEP 7:
Push the high pressure hose into the trigger gun until it locks audibly. Note: Make sure the connection nipple is aligned correctly.
Check the secure connection by pulling on the high pressure hose.
Install the dosage regulator for de- tergent
STEP 6:
Insert detergent suction tube onto the hose fitting.
Install the dosage regulator and connect using 2 screws.
Note: During installation you must make sure that the tongues of the dosage regulator match up with the intended recesses in the casing.
Disconnect:
Press the disconnect key on the trigger gun and remove the high pressure hose from the trigger gun.
8English
