Karcher K 4.93 M Operation, Scope of delivery, Description of the Appliance, Before Startup

Operation

Scope of delivery

The scope of delivery of your appliance is il- lustrated on the packaging. Check the con- tents of the appliance for completeness when unpacking.

In the event of missing accessories or any transport damage, please contact your dealer.

Description of the Appliance

These operating instructions describe the maximum equipment. Depending on the model, there are differences in the scopes of delivery (see packaging).

Illustrations on Page 2

1Coupling element for water connection

2Connection for water supply with filter

3Dosage regulator for detergent

4Suction hose for detergent

5Transport handle

6Detergent Tank

7Storage for trigger gun

8Storage for accessories

9Power cable with plug

10ON/OFF switch for appliance

11High pressure connection

12Trigger gun

13Lock trigger gun

14High pressure hose

15Spray lance with Dirtblaster

16Spray lance with pressure regulation (Vario Power)

Special accessories

Special accessories expand the possibili- ties of using your appliance. Please contact your KÄRCHER dealer for further informa- tion.

Before Startup

Illustrations on Page 2

Illustration

ÎMount loose parts delivered with appli- ance prior to start-up.

Illustration

ÎPush the high pressure hose into the trigger gun until it locks audibly.

Note: Make sure the connection nipple is aligned correctly.

ÎCheck the secure connection by pulling on the high-pressure hose.

Water supply

According to the applicable regula- tions, the appliance must never be used on the drinking water supply without a system separator. Use a suitable system separator manufactured by KÄRCHER; or, as an alternative, a system separator as per EN 12729 Type BA. Water flowing through a system separator is con- sidered non-drinkable.

Note: Impurities in the water can damage the high-pressure pump and accessories. For protection, the use of the KÄRCHER water filter (optional accessory, order no. 4.730-059) is recommended.

Water supply from mains

Observe regulations of water supplier.

For connection values, see type plate/tech- nical data.

ÎUse a fibre-reinforced water hose (not included) with a standard coupling. (Minimum diameter 1/2 inch (13 mm), minimum length 7.5 m).

ÎPush the water supply hose onto the coupling unit, then connect it to the wa- ter supply.

Drawing in water from open reservoirs This high-pressure cleaner is suited to work with the KÄRCHER suction hose with back- flow valve (Optional accessory, order no.

4.440-238) to draw in surface water, e.g.

6English