OPERATING INSTRUCTIONS
ÎSTEP 1:
Unwind the high pressure hose com- pletely from the hose reel.
ÎSTEP 2:
Insert the spray wand of your choice into the trigger gun. Press in against
the spring tension and twist into locked position.
ÎSTEP 3:
Connect garden hose to unit’s water inlet.
ÎSTEP 4:
Connect garden hose to the cold wa- ter source and turn water on com- pletely.
ÎSTEP 5:
Plug the Ground Fault Circuit Inter- rupter (GFCI) into a working outlet.
We recommend that you test the GFCI as part of your startup procedure each time you use your pressure washer. To learn how to peform this test on your unit, visit http://www.karcherresidential.com/ gfci_test.php for detailed instructions for your type of GFCI.
WARNING
Do not use if above test fails.
Note: The actual appearance of the GFCI may be different from this illustration.
ÎSTEP 6:
Unlock the trigger gun safety lock. Trigger the gun to eliminate trapped air, wait for a steady flow of water to emerge from the spray nozzle.
ÎSTEP 7:
Turn on the high pressure washer (I/ ON).
The motor starts only if the trigger of the gun is pulled and shuts off when the trigger is released.
English 7