Kawasaki 840108 Charging Battery Pack, Remove Battery Pack 1. Press both release

REMOVING / ATTACHING BATTERY PACK

REMOVE BATTERY PACK: 1. Press both release

buttons on either side of the Cordless Reciprocating Saw to release the battery pack.

2. Pull battery pack free of Cordless Reciprocating Saw.

The battery pack and charger heat during charging. Place the charger on a flat, non-flammable surface away from flammable materials with at least four inches of clearance to allow proper air circulation around the charger and battery pack.

When the battery pack requires recharging, a 3-5 hour charge allows the tool to operate at full power. A charging indicator light on the charger will illuminate to show that charging is taking place.

CHARGING BATTERY PACK

ATTACH BATTERY PACK:

1. Align the raised portion of the battery pack with the groove in the battery compartment

CHARGE BATTERY PACK:

1. Make sure the trigger on

the Cordless Reciprocating

Saw is in the “OFF”

position and remove

BATTERY PACK

of the Cordless Reciprocating Saw.

RELEASE BUTTON

the battery pack

from the Cordless

120V AC

ADAPTER

2.Press the battery pack into place. Make sure the latches are securely fastened. Do not use the Cordless Reciprocating Saw if the battery pack is not seated properly.

CHARGER

Before using battery charger, please read carefully all instructions and cautionary markings on battery charger, battery pack and product using battery.

Reciprocating Saw.

2. Plug 120V AC Adapter into

household outlet and into

side of battery charger.

Insert battery pack into

battery charger. LED light

will turn green when

battery pack is fully

charged (approx. 3 hours).

LED LIGHT

BATTERY

CHARGER

The charger will not automatically turn “OFF” when the battery pack is fully charged. The charging indicator light will remain “ON” until the charger is disconnected from the electrical outlet.

Use only the charger which accompanied your product or direct replacement as listed in this manual. Do not substitute any other charger. Use only Alltrade approved chargers with your product.

Do not disassemble charger.

Do not use charger if it has been damaged, left outdoors in the rain, snow, wet or damp environments, or immersed in liquid.

3.When fully charged, reattach battery pack onto Cordless Reciprocating Saw, making certain latches fasten securely. Cordless Reciprocating Saw will not operate properly if the battery pack is not seated properly.

9 10