Personal Safety, Tool USE and Care, Service

PERSONAL SAFETY

Stay alert, watch what you are doing, and use common sense when operat- ing a power tool. Do not use tool while tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.

Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on invites accidents.

Remove adjusting keys or wrenches before turning the tool “ON”. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury.

Do not overreach. Keep proper footing and balance at all times. Proper foot- ing and balance enable better control of the tool in unexpected situations.

Use safety equipment. Always wear eye protection. Dust mask, non-skid safe- ty shoes, hard hat, or hearing protection must be used for appropriate conditions..

TOOL USE AND CARE

Use clamps or other practical ways to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.

Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.

Do not use tool if the power switch does not turn it “ON” or “OFF”. Any tool that can- not be controlled with the power switch is dangerous and must be replaced.

Disconnect the power cord plug from the power source before making any adjustments, changing accessories or storing the tool. Such preventive safe- ty measures reduce the risk of starting the tool accidentally.

Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.

Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with a sharp cutting edge are less likely to bind and are easier to control.

Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.

Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool.

SERVICE

Tool service must be performed only by qualified repair personnel. Service or maintenance by unqualified personnel could result in a risk of injury.

When servicing a tool, use only identical replacement parts. Follow instruc- tions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of shock or injury..

SPECIFIC SAFETY RULES AND/OR SYMBOLS

Hold tool by insulated gripping surfaces when per- forming an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire will also make exposed metal parts of the tool “live” and shock the operator.

SAFETY RULES FOR RECIPROCATING SAWS

Always wear safety goggles or eye protection when using this tool. Use a dust mask or respirator for applications which generate dust.

Secure the material being worked on. Never hold it in your hand or across your legs. Unstable support can cause loss of control and injury.

When using the Reciprocating Saw, always maintain a firm grip on the tool with both hands. Never put your hands or feet in the cutting area. Do not grasp the tool or place your hands too close to the blade. Keep your hands well away from the blade. Never reach underneath the tool while the blade is in motion. Do not use your legs or feet to stabilize the work piece.

Position yourself to avoid being caught between the tool or side handle and walls or posts. Should the blade become bound or jammed in the work, it could result in loss of control and injury.

840844 specifications

The Kawasaki 840844 is a cutting-edge addition to the realm of high-performance power equipment, designed to cater to both enthusiasts and professionals alike. This model embodies the latest advancements in engineering and technology, making it a standout in its category.

At the heart of the Kawasaki 840844 is a robust engine that delivers impressive power and reliability. The engine features advanced cooling systems that ensure optimal performance even under demanding conditions. Its efficiency translates to lower fuel consumption and reduced emissions, making it an environmentally friendly choice. The durability of the components used in the engine construction is indicative of Kawasaki's commitment to quality, ensuring a long-lasting product that can withstand rigorous use.

One of the hallmark features of the Kawasaki 840844 is its ergonomic design. The comfortable grip and well-placed controls enhance user experience, reducing fatigue during extended operation. The equipment's weight distribution is optimized, making it more manageable and easier to maneuver. This aspect is crucial for professionals who require quick and agile equipment in tight spaces or challenging terrains.

The 840844 also incorporates advanced technology for enhanced performance. The model may include features like electronic ignition and automatic choke systems which facilitate easier startups and smoother operation. Some versions might come with adjustable settings, allowing users to tailor performance to specific tasks or environmental conditions, whether it’s for landscaping, construction, or other professional applications.

Safety is a significant consideration in the design of the Kawasaki 840844. The model is equipped with multiple safety mechanisms, including automatic shut-off features and protective guards, ensuring that users can operate the machine with confidence. Additionally, sound dampening technology may be integrated, providing a quieter operational experience, which is particularly beneficial for urban or residential settings.

Overall, the Kawasaki 840844 represents a harmonious blend of power, innovation, and user-friendliness. Its reliable performance, combined with ergonomic design and advanced safety features, makes it an exceptional choice for anyone in need of high-quality power equipment. Enhanced by Kawasaki's legacy of excellence, the 840844 stands as a testament to the brand's dedication to delivering superior solutions in the power equipment industry. Whether for commercial landscaping, efficient maintenance, or heavy-duty tasks, the Kawasaki 840844 is poised to meet and exceed expectations.

Kawasaki 840844 Personal Safety, Tool USE and Care, Service, Specific Safety Rules AND/OR Symbols

Models: 840844