Steering Column
Connector
6BACK VIEW
•Turn the vehicle upright.
•Fit the handlebar steering column down through the large opening in the front end of the vehicle.
Steering Column
7BOTTOM VIEW
•Lift the front end of the vehicle up slightly. Check to be sure the steering column fits through the hole in the steering linkage. Lower the front end of the vehicle.
Steering Column Cap
8
•While holding the handlebar in place, carefully turn the vehicle over.
•Again, make sure the end of the steering column is through the hole in the steering linkage.
•Fit the steering column cap onto the end of the steering column.
•Insert a #8 x 3/4" screw through the large opening in the steering column cap and into the hole in the steering column. Tighten the screw.
Plate 
9
•Slide the plate under the steering column, as shown.
•Insert a #8 x 3/4" screw into the plate and tighten.
10 |
