Installation
Install CB Module
zz Mount the CB module using the two supplied 6 x 30mm bolts on the top and re-using the lower bolt. Tighten all three bolts firmly but do not over tighten as this may damage the plastic fairing lower.
zz Route the harness from the CB module behind the left engine guard and into the left side of the fairing. Find the matching multi-pin connector at the left side of the radio and connect to the CB module harness. Press the connectors together firmly to engage the waterproof seals. Secure the cables as needed with provided cable ties.
NOTE
oo If the optional XM Radio K10400-038 will also be installed, a K10400-042 Splitter Cable (sold separately) will also be needed to connect both XM and CB to the OE radio.
Install CB Antenna
zz Connect the threaded end of the CB antenna cable to the right- angle fitting on the CB module and firmly hand tighten.