zz Install the antenna base from the outside of the trunk. Install Belleville (curved) washer and locknut onto the threaded brass post. Do not over-tighten as this may damage the plastic base.
zz Remove the right rear trunk bolt and install the provided metal grounding bracket at this point and to the lower mounting hole of the antenna base.
zz Connect the black wire with white marking tape from the CB antenna cable to the lower threaded hole in the antenna base with the provided Philips head screw.
zz Install remaining ring terminal from the antenna cable onto the brass post and lock down with lock washer and cap nut.
zz Install the antenna mast with star washer and confirm the vertical positioning of the mast matches that of the AM/ FM antenna. Adjust the positioning of the AM/FM antenna accordingly. Tighten the mast securely but do not over tighten.
NOTE
oo Do not use thread locking compound on the threads of the antenna mast as this may damage the plastic.
zz Switch the ignition to “accessory” and turn the radio on, then follow the Owners Manual to select the “CB on” function. The CB channel in the lower left corner of the radio display should show the CB channel number. If the channel number does not show, check all connections and the accessory fuse. After proper CB operation is confirmed, switch off the ignition.
