INTRODUCTION
GENERAL
Keating MIRACLEAN® Electric Griddles are designed to give maximum production efficiency, delivering high quality food products. The following design features are incorporated into Keating MIRACLEAN® Electric Griddles.
STANDARD
FEATURES
MIRACLEAN® energy efficient plate
Welded stainless steel perimeter
Welded stainless steel grease trough
Baffle grease drawer with rear handle
Stainless steel control panel
STANDARD
ACCESSORIES
Keating griddle scraper
Package of 10 scraper blades
Palmetto brush
4” special Keating spatula
Keating egg turner
Keating Klenzer sample
OPTIONS
380 or 480 volt input | |
Single phase input | |
High input heating elements |
SAFETY PRECAUTIONS
THIS SYMBOL WARNS YOU THAT SERIOUS BURNS OR OTHER INJURIES MAY RESULT IF SAFETY INSTRUCTIONS ARE NOT FOLLOWED.
This service manual should be retained in a safe place for future reference.
The installation of your new griddle must conform to local codes or in the absence of local codes, with the current National Electrical Code ANSI/NFPA 70 or Canadian Electrical Code CAN 22.2 as applicable.
Your ventilation hood, when installed, must conform to the current ANSI/NFPA 96 standard.
Installation clearance requires 6” from rear and side walls.
You must maintain this appliance free and clear from combustibles.
Adequate clearance for servicing and proper operation must be maintained.
Your Keating MIRACLEAN® is designed to be serviced form the front, except for the rear field wire connections (electric input).
Keating commercial griddles are intended for other than household use.
ALWAYS instruct new employees on proper griddle operation.
A MIRACLEAN® griddle should be operated ONLY by properly trained personnel.
ALWAYS turn griddle off each night.
ALWAYS disconnect electrical supply before servicing.
NEVER leave a griddle unattended during operation.
NEVER move griddle when hot.
MODEL VARIATION
Standard Griddles: Keating MIRACLEAN® electric griddles are available in widths ranging from 24” to 72” and in 24”, 30” and 36” depths. The electric griddles are ETL listed.
CAUTION
Read all operating and safety instructions before using equipment.
WARNING
Plug into a properly grounded
THIS GRIDDLE MAY NOT BE ALTERED, MODIFIED OR CHANGED IN ANYWAY.
Safe operation of this equipment is possible only when the operating instructions and the safety precautions are read completely and the instructions contained therein are strictly observed. Before operating this equipment, ask for a practical demonstration.
Periodically inspect cable and plug, if provided, before using machine. Servicing should be performed by qualified and licensed service companies.
1
