Ken-A-Vision 1470 Application, Specifications, Optional Accessories, Aqua Flex Preparation

Application:

Ken-A-Vision's Aqua Flex is a CCD camera with built in "cool light" source for use underwater. Camera is ideal for use in classroom aquaria (fresh or saltwater), and/or in relatively non-turbid aquatic situations (lakes, ponds, streams, tidal pools) where visualization of organisms or structures is desired. Camera will send a clear picture back to a TV monitor, LCD projector or VCR directly. If a USB adapter (Ken-A-Vision USBAD2) is connected to the camera, individual, time lapse, time lapse movies or video movies can be captured and stored on a computer, Applied Vision® Software for Windows® is supplied with the adapter, and also allows Video Streaming and FTP uploading.

Specifications:

Water Proof	50 ft. (15.2 m)
Video Cable	33 ft. (10 m)
Connection	Video RCA Jack
Mounting Thread	1/4 20
Horizontal Attachment
Brackets	2
Leader	1 - suspends unit in horizontal
	position for hooking on
	to pole or bar.
Illumination	Ken-A-Vision "Cool light"
Weight	2 lbs. (0.91 kg.)
Image Output	Composite (NTSC or PAL)
Focal Distance	3.9 in. or 10 cm. to infinite: fixed
Magnification	50:1 or greater
Power Supply	250mA @ 5 volts DC
	(KAV Part Number AFPS)
Warranty	1 year

Optional Accessories:

Submergible Extension Rod

Car Adapter (for power)

Outdoor Nature Trail Pack

Aqua Flex Preparation:

Note: Be careful not to submerge 110v end of power cord.

Powering up Aqua Flex camera -

1.Plug the Power Supply into the red end plug of the Video Cable.

2.Plug the Yellow video plug into the TV

monitor, LCD Projector or VCR. (note-VCR cord can be extended by a video cable extension available in many electronic stores)

3.Plug power Supply cord into electricity source.

4.Picture should appear on monitor.

Preparation of Aqua Flex Camera -

1.Camera is ready to submerge in water as shipped. It can be placed on bottom or suspended.

NOTE: It is not recommended that camera be suspended or maneuvered by the Video Cable itself, as continued pulling on cord will shorten the life of the camera and it's electrical hookup.

2.Camera can be suspended or maneuvered by screwing a 1/4 20 screw mount into the base of the camera, in the hole provided. (This is a standard camera tripod mount, or a piece of 1/4 20 all-screw can be purchased at a hardware store, or a 1/4 20 bolt can be mounted on the end of a rod and then connected to the camera).

3.If camera to be suspended horizontally in water, either hook suspension apparatus directly to two mounting hooks provided, or hook leader to the two mounting hooks, and connect leader to suspension apparatus.