Kenmore TOP-MOUNT REFRIGERATOR, 106.602389 manual Can Oo Bns, Ut@ CompsPtment, Drop-In Door Rails

NOTE: To keep the basket from falling, hold the basket while removing the bracket.

A

A.Bracket

3.Grasp the right-hand bracket. Firmly press the bracket toward the outside to pull the bracket away from the door tab.

NOTE: To keep the basket from falling, hold the basket while removing the bracket.

4.Remove the basket.

To Replace the Tilt-Out Freezer Basket:

1.Snap the right-hand bracket onto the tab above the freezer door shelf

IMPORTANT: Be sure that the bracket touches the shelf and push the bracket back until it snaps firmly into place.

The door rails may be removed for easier cleaning.

Snap-On Door Rails

To Remove and Replace the Rails:

1.Remove the rails by pushing in slightly on the front of the bracket while pulling out on the inside tab. Repeat these steps for the other end of the rail.

2.Replace the rails by aligning the ends of the brackets with the buttons on the sides of the door liner. Firmly snap bracket and rail assembly onto the tabs above the shelf as shown.

Drop-In Door Rails

To Remove and Replace the Rails:

1.Remove the rails by pulling straight up on each end of the rail.

2.Replace the rails by sliding the shelf rail into the slots on the door and pushing the rail straight down until it stops.

2.Insert the left-hand basket post into the left-hand bracket.

A. Basket post

3.While holding the left-hand bracket in place, insert the right- hand basket post into the right-hand bracket on the freezer door.

4.Snap the left-hand bracket onto the tab above the freezer door shelf.

IMPORTANT: Be sure that the bracket touches the shelf and push the bracket back until it snaps firmly into place.

Can and ©oo Bns

(os some mode_@

NOTE: Can racks may be purchased as an Accessory for some models.

To Remove and Replace the Racks/Bins:

1.Remove the rack/bin by lifting it and pulling it straight out.

2.Replace the rack/bin by sliding it in above the desired support and pushing it down until it stops.

e Ut;@ CompsPtment &

(@s some _r_o_:Sels_

The utility compartment and tray slide from one side to the other for more flexible storage. The tray fits on either side of the utility compartment or partially underneath it. Try moving it to different positions to find the option that works best for you.

To Install and Adjust the Utility Compartment and Tray:

1.Insert the front of the utility tray into the slot on the back of the shelf rail. Lower the back of the tray into position.

14