DRYER USE
AUTO DRY | DELICATE | MANUAL | ESIIMAIEO |
CASUAL |
|
|
OPTUONSMODURERS
DA _IP0 | 0 | MORE | NORMAL |
COOL DOWN 0 | © | CYCLES | |
SIATUSwEo |
| ||
| 0 | LESS |
|
WRIKLE6UARD0 | AUTO DRY | ... | |
|
| ||
CEC_Erlf SC_E4o |
| LEVEL |
|
RESS&HOI)3 BULKY / BEDDIN
CONIRO[ LOCKEOO s_{o [1 0 0CK/HEAVY DUlY UNLOCK CONTROl
| @ | HIGH |
|
|
|
| MEDIUM HIGH |
|
|
| @ MEDIUM |
|
| |
| @ | LOW | @ | HIGH |
DAMP DRY SIGNAL |
|
|
|
|
ALIO/YCIISONtY_ | _ | EXTRALOW | @ | LOW |
| • | AIR DRY | @ | OFF |
WRINKLE GUARD | TEMPERATURE | END of CYCLE SIGNAL | ||
| [',IA_UALCYCLESONLY; |
|
| |
J
J
Explosion Hazard
Keep flammable materials and vapors, such as gasoline, away from dryer.
Do not dry anything that has ever had anything flammable on it (even after washing).
Failure to follow these instructions can result in death, explosion, or fire.
WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.
Follow these basic steps to start your dryer. Please refer to specific sections of this manual for more detailed information.
1.Clean lint screen before each load. See "Cleaning the Lint Screen."
2.Place laundry in dryer and shut door.
3.Press the selected cycle pad. The preset settings for Auto Dry Cycles or Manual Cycles will glow. The estimated or actual cycle time (in minutes) will show in the display.
To use an Auto Dry Cycle
•Select an Auto Dry Cycle.
•Select AUTO DRY LEVEL to adjust how dry you want the load. As the cycle runs, the control senses the dryness of the load and adjusts the time automatically for the selected dryness level.
•Select the desired Options.
Fire Hazard
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on it ({ncmuding cooking oils).
Items containing foam, rubber, or plastic must be dried on a cmothesHne or by using an Air Cycme.
Failure to follow these instructions can result in death or fire.
To make changes during an Auto Dry Cycle:
Adjust Options.
NOTE: Auto Dry Level selections can be made only while using Auto Dry Cycles. You can select a different dryness level, depending on your load, by pressing Auto Dry Level
and choosing More or Less. Selecting More or Less automatically adjusts the sensed time needed.
@ MORE
@
@LESS
C)
AUTO DRY
LEVEL
PRESS & HOLD 3
SECONDS TO LOCK /
NLOCK CON]ROL
2O
