CANISTER
1, Open the canister hood,,
2.Check to see that the dust bag is proper- ty installed. See BAG CHANGING for instructions.,
3.Check to see that the motor safety filter is
properly installed, See MOTOR SAFETY FILTER CHANGING for instructions.,
HOOD AND TOOL
STORAGE COVER
It is normal for the canister hood and tool storage cover to come off when opened fur- ther than needed. Line up the hinge slots, insert the hinges into the slots, and close the hood and tool storage cover to reinstaE
CAUTION
Never open canister hood with the tool storage cover open. This will help to prevent damage from occurring to the canister hood and/or tool storage cover.
HOSE
1.Line up the hose latch tab and notch
in canister hood and insert hose into canister until it snaps in place.
To remove: Lift hose latch tab
upward and pull up on hose_
Handle
Lock
Button
Handle
Quick
Hose
Latch
Tab
Notch
2.Insert handle into wand until lock button
snaps in place Be sure hose
is not twisted.
To remove:
Press handle quick release button and pull up on handle_
This canister is equipped with an
To Install:
Open the Pet PowerMate storage cover. Insert the Pet PowerMate, press down into place, and close the lid securely.
To Remove:
Open the storage cover. Remove Pet PowerMate from the storage area and use as needed (see ATTACHMENTS and
ATTACHMENT USE TABLE)°
To store: Disconnect hose from wands and canister to prevent stress on hose during storage° Store hose in a loosely coiled position so the hose covering is not stressed.
Pet PowerMate
Storage Cover
/
