BAG CHANGING | I |
For best cleaning results, the dust bag should be changed often° The electronic performance indicator will come on when
the bag needs to be changed or the airflow is blocked
NOTE: See PARTS AND FEATURES _r Bag Number
1. Turn off and
unplug vacuum cleaner from walt outlet°
7.The red bag mount will flip forward after removing bag This will prevent the hood from closing until a new bag is installed.
Note: DO NOT bend or crease the middle of the cardboard when installing the bag into the bag mount slots,
8.Rotate red bag mount down and install bag into slots per illustration, pushing down until the cardboard tab
then lift canister hood°
4.Disengage cardboard tab from
red bag mount by pulling away and lifting up
MotorY/_/
,ter ii ii ii /ii/i/
Mount
2.Remove hose from canister,
3.Pull hood
release out and up,
5.Pull bag out of the red bag mount.
6.Check the
motor safety filter and
replace, if necessary.
locks into position and the holes align. Tuck the bag
securely into the bag cavity so that none of it is able to be pinched by the hood,
9.Close and latch canister hood.
10.Reinstall hose
11.Plug cord into wall outlet,
CAUTION
NEVER REUSE A DUST BAG. Very fine materials, such as carpet freshener, face powder, fine dust, plaster, soot,
new carpet lint, etc. can clog the bag and cause it to burst before it is full and
may cause damage to vacuum cleaner motor. Change bag more often when vacuuming these materials.
CLEANING EXTERIOR AND ATTACHMENTS
i. Turn off and unplug vacuum cleaner. DO NOT drip water on vacuum cleaner,
2.To clean exterior, or to reduce static elec-
tricity and dust
CAUTION
Do not use attachments if they are wet.
Attachments used in dirty areas, such as under a refrigerator, should not be used on other surfaces until they are washed. They could leave marks.
15
