Samsung DW60H5050FS/TN manual Elements cool down before cleaning, Result in the risk of burns

Troubleshooting

PROBLEM		POSSIBLE CAUSE		WHAT TO DO
Spots and filming on	1.	Extremely hard water.	To remove spots from glassware:
glasses and flatware	2.	Low inlet temperature.	1.	Take out all metal utensils out of the
	3.	Overloading the		dishwasher.
		dishwasher.	2.	Do not add detergent.
	4.	Improper loading.	3.	Choose the longest cycle.
	5.	Old or damp powder	4.	Start the dishwasher and allow it to run
		detergent.		for about 18 to 22 minutes, then it will be
	6.	Empty rinse agent		in the main wash.
		dispenser.	5.	Open the door to pour 2 cups of white
	7.	Incorrect dosage of		vinegar into the bottom of the dishwasher.
		detergent.	6.	Close the door and let the dishwasher
				complete the cycle. If the vinegar does
				not work: Repeat as above, except use
				1/4 cup (60 ml) of citric acid crystals
				instead of vinegar.
Cloudiness on	•	Combination of soft water	•	Use less detergent if you have soft water
glassware		and too much detergent.		and select a shortest cycle to wash the
				glassware and to get them clean.
Yellow or brown film on	•	Tea or coffee stains.	• Using a solution of 1/2 cup of bleach and
inside surfaces				3 cups warm water to remove the stains
				by hand.
				WARNING: You have to wait for 20
				minutes after a cycle to let the heating
				elements cool down before cleaning
				interior; Failing to follow this instruct may
				result in the risk of burns.
	•	Iron deposits in water can	•	You have to call a water softener
		cause an overall film.		company for a special filter.
White film on inside	•	Hard water minerals.	•	To clean the interior, use a damp sponge
surface				with dishwasher detergent and wear
				rubber gloves. Never use any other
				cleaner than dishwasher detergent for the
				risk of foaming or suds.
Detergent cup lid won’t	•	Dial is not in the OFF	•	Turn the Dial to OFF position and slide the
latch		position.		door latch to the left.
Detergent left in	•	Dishes block detergent	•	Re-loading the dishes properly.
dispenser cups		cups.
Steam	•	Normal phenomenon.	•	There is some steam coming through the
				vent by the door latch during drying and
				water draining.
Black or gray marks on	•	Aluminum utensils have	•	Use a mild abrasive cleaner to eliminate
dishes		rubbed against dishes.		those marks.
Water standing in the	•	This is normal.	•	A small amount of clean water around the
bottom of the tub				outlet on the tub bottom keeps the water
				seal lubricated.

42_ Troubleshooting