Kenmore 116.38412 owner manual Plate as, Cleaning section

WARNING

Electrical Shock Or Personal Injury

Hazard

Disconnect electrical supply before servicing or cleaning the unit. Failure to do so could result in electrical shock or personal Injury from cleaner suddenly starting.

Disconnect the power cord from the elec- trical outlet.

Press the handle release pedal to let the upper portion of the cleaner lay back against the floor.

	Remove
	Two Locking Tabs the base
Latches	plate as
	outlined In
	the BELT
	CHANG-
	ING AND
	BRUSH
	CLEANING
	section°

Grasp the bulb socket

assembly and while

gently rock- ing it from side to side,

pull it up out of the noz-

Bulb Socket Assembly

zle housing.

				Remove the light
	_E	ToReleaso		bulb by pushing
				the bulb in while
				clockwise		to
				release	from the
_)	__,			turning	counter-
				slot.Then		pull the
				light bulb		straight
				out.
To replace		the	light
bulb carefully			insert	,_
and turn clockwise				!I
to securely		fit into
slot.
NOTE:	See	PARTS
AND FEATURES
for bulb	#.

CAUTION

Do not use a bulb rated over 15W.

During extended use, heat from the bulb could overheat surround-

ing plastic parts,

E CAUTION

Do not plug in or turn on until the vacuum is completely raassem- bled.

i i ,

Replace the base plate as outlined in the

BELT CHANGING AND BRUSH

CLEANING section.

Two Locking Tabs

Latches

20