Kenmore 116.38412 owner manual Handle Mounted, To USE Attachments, Body Mounted

Release the handle by pressing down on the handle release pedal with your foot and pulling back and down on the handle with your hand.

Handle

Release Pedal

HANDLE MOUNTED

SOME MODELS

To start the vacuum

cleaner, slide the On!Off switch from

the OFF position to the ON position. To

stop the vacuum cleaner, slide the On/Off switch to

the OFF position.

Crevice

Tool....

Telescoping

DustingStretch

Hose

UpholsteryHose

Collar

Identify each of the attachments shown above.

TO USE ATTACHMENTS:

Place the bare floor selector in the bare floor setting by rotating the selector back and down to the bare floor setting° See

CARPET/BARE FLOOR SELECTOR section.

BODY MOUNTED

SOME MODELS

To start the vacuum cleaner, put the On/Off switch on the top of the body in the ON position. To stop the cleaner, put

theswitchOn/Offin _-_			i'
F---'-'On!Off			I
position.
the OFF
Pewer-_. 7	I	_	Handle

When returning the bare floor selector to the carpet setting, use caution as the selector can move quickly to that setting due to tension created by the belt.

Remove the lower end of the stretch hose from the cleaner by grasping the hose collar, twisting and pulling straight out.

NOTE: The motor protector may open when using attachments or when cleaning new carpet, due to reduced airflow by the attachments themselves or by new carpet fuzz filling the bag quickly. See the TROUBLESHOOTING section.

WARNING

Electrical Shock And Personal

Injury Hazard

Disconnect electrical supply before

servicing or cleaning the unit. Failure to do so could result in

electrical shock or personal Injury from cleaner suddenly starting.