Kenmore 1230, 1240, 1250 manual Buttonholing

BUTTONHOLING

SETTINGS:

Special Stitch Dial - {o Iii(Model 1250 only) Special Stitch Variegator- Red mark on top

(Model 1250) Red dot to the

..--=left(Model 1240)

Stitch Width Control - -_.-:

Stitch Length Control- Between 24 and

white dot

Satin Stitch Foot

Y

Special	St!tCh	Stitch
(Model	1250only}	Width	Length:	:: Control	:

1 Mark the buttonhole length at both

ends and also the center line. See Fig. 1

							Fig.	1
. Position		fabric	under		needle.		The
first stroke of the needle should be to
the right and pierce fabric at point.
A.	Stitch	forward		on left		side	of
buttonhole		until		desired		length	is
obtained.		Stop	with		needle	in fabric
on	right	side of		stitching.		Point	B
							B.
See	Fig.	2					Fig.	2

,Raise presser foot and turn material and set stitch width control to three. Lower• presser foot and take one stitch to the left. Point B to C. See Fig. 3

Fig. 3