WINDING THE BOBBIN
• • k
k
- k
,Release clutch by turning clutch knob toward you.
2. Draw thread from spool through bobbin winder tension discs as shown.
3.Pull end of thread through hole in bobbin as shown.
4.Place bobbin onto bobbin winder shaft
with end of thread coming from the top of the bobbin. Push bobbin winder
latch against bobbin until it clicks.
Holding onto end of thread, start machine. When bobbin is slightly filled, snip off end of thread.
5. Start machine. Wind thread until bobbin winder latch releases.
6. Tighten clutch knob and remove bobbin.
Two spool pins have been included with this machine to aid in bobbin winding. By
placing a spool of thread on the second spool pin, you may wind your bobbin without unthreading the machine.
