Kenmore 1232 manual IVlachine

Ca ing iVlachine !i

Fig 1

Lever-_4_Lever

Shuttle Assembly

ShuttIe Race Cover

Pointed --_

hook Shuttle

Shuttle driver

!

Shuttle Race

Fig 1 Cleaning the feed dogs with a brush,,

To insure the best possible operation

of your machine, it is necessary to keep the essential parts clean at all times, Using a small brush, remove the

lint that accumulates in the shuttle

area and around the feed dogs,

Fig,. 2 Parts of the Shuttle Assembly

To Clean the Shuttle Area:

This area must be kept free of dust, lint and occasional tangled thread, Raise the needle bar to its highest point and remove the bobbin case_

,Push levers of shuttle race aside and lift shuttle race cover and shuttle out,

3, Clean the shuttle race with small brush,

4., Put a drop of oil on the center pin of the shuttle and shuttle race, (see

arrows)

To Replace Shuttle Assembly:

1, Position shuttle race as illustrated

so that race is forming half moon on the left side of the machine

2, Hold shuttle by center- pin and posi- tion shuttle so as to form a half

moon on the right side Pointed hook will be on the bottom,

3.Place shuttle race cover into place over shuttle assembly.

4, Snap the levers into position

Fig. 2