Fig, 1 Fig, 3
Fig, 2Fig 4
1 To install the machine in cabinet, posi-
tion machine head on cabinet platform
so that holes on bottom of machine
match those on board Insert washers
and screws and tighten into place. (Fig
1) (Follow instructions provided with
Sears Cabinet Screws and washers are
supplied with cabinetl)
2 Aseparate base and cover is available to
carry the machine when needed
To install machine in carrying case, set
machine into base, with word FRONT in
base facing you (Fig. 2)
Piece cover on machine with word
"SEARS" on handle facing you° The
case slopes in the same direction of the
machine, (Fig 3)
Push the speed control plug onto three-
prong connector. Plug machine cord into
any 1t0-120 volt walt outlet. Turn on
power by pushing light and power
switch. (Fig. 4)
Spool pins are packed in accessory box.
Screw thread spool pins in place securely
with a screw driver Position nylon discs
as shown in illustration