Sideburner
[] Loosenside burner inside shelf.(B). To loosen,unscrew and remove two front screws and washers
holding sideburner in place. (A). Note: Do not loosen electrode screw.
[] Removeknob and bezel from sideburner control valve. To remove, pull knob straight outfrom valve
stem.Unscrew bezel from valve face and set the two screws aside.
[] Insertvalve stem through holein fascia. (C) Attach bezel to fascia and valve face with previously
removed 2 screws. (D)
[] Placesideburner tube over the valve, making surethat valve is insidesideburner tube. (E)
[] Reattach sideburner to sideburner shelf with the 2 previously removed screws and washers. (G)
[] Pushcontrol knob onto sideburner valve stem. (F)
[] Replace sideburner grate. (G)
[] Insertthe small tips ofthe four main control panel wires intofour of the five module sockets. Insertthe
small tip of the sideburner wire intothe fifth socket. For the other wire with larger tips, attach the
two-wire tip to the module bare terminal. Attach the other tip to theterminal on top of the sideburner
control valve. (H)
[] Unscrew igniter cap from control panel. Insert (1)AA battery (notprovided) into battery slot with
positive end (+) facing outward. Screw igniter cap back onto panel. (I)
16132-40200104 • 23