Kenmore 148.1615421 manual Install Wing Tables

Install two wing mechanisms to each wing table with four screws as shown.

3/16-24 x 5/8 in. Screw Qty. 8

Install Wing Tables

Loosen the 2 screws (as shown) on each side of grill head 4 to 6 turns.

Slide the slot in each wing mechanism bracket over a loosened screw. Insert one 1/4-20 x 3/4 in. screw through hole in each wing mechanism bracket and tighten to grill head. Note: Attach each wing table so that rounded edge faces front. Raise each table until it locks into position as shown. Tighten all four previously loosened screws.

Note: Check wing tables to see if level. If not, add washers from hardware pack beneath screws as needed.

Slide slots over screws

1/4-20 x 3/4 in. Screw Qty. 4

Loosen the two screws

20