Replacing the Thermocouple

1.Remove the Burner Door Assembly as directed previously.

2.Remove the retainer clip from the back of the two piece wire connector and remove the two piece wire connector from the assembly (Figure 27).

3.Pull the thermocouple from the pilot assembly (Figure 31).

IMPORTANT: Be careful not to bend or alter the position of the pilot assembly components.

4.Push the new thermocouple through the holes in the pilot bracket. Insert the thermocouple tube into the holes provided in the pilot assembly until it clicks into place. Leave a small straight section entering and leaving the two piece wire connector section for easier removal/ service.

5.Position the new thermocouple through the opening of the two piece wire connector (Figure 27). NOTE: The pilot tube should be located at the top followed by the igniter wire then the thermocouple.

6.See “Replacing the Burner Door Assembly” section.

PILOT IGNITER

THERMOCOUPLE TUBE WIRE

External Inspection & Cleaning of the Flame Arrestor

Although not likely to occur, if debris collects on the flame arrestor, use a vacuum, compressed air, or a soft bristle brush to remove it. NOTE: If unable to inspect or clean the flame arrestor from underneath, follow the “Cleaning the Combustion Chamber and Flame Arrestor” section instructions.

Flashlight

Mirror

TWO PIECE

RETAINER CLIP

WIRE CONNECTORMANIFOLD

DOOR

FIGURE 27.

Cleaning the Pilot Assembly

1.Follow the procedure outlined in “Removing the Burner Door Assembly”.

2.Use a soft bristle brush to remove any debris that may have collected on the pilot. Note: Clean any debris found in the air slots at the base of the pilot. See Figure 28.

3.Follow the steps in “Replacing the Burner Door Assembly” section to reassemble.

 

PILOT

IGNITER

AIR SLOTS

 

PILOT BRACKET

FIGURE 28.

Mirror

FIGURE 29

Cleaning the Combustion Chamber and Flame Arrestor

1.Follow procedure outlined in “Removing the Burner Door Assembly” section.

2.Use a vacuum cleaner/shop vac to remove all loose debris in the combustion chamber (Figure 30). Use compressed air to clear any dust or debris that may have accumulated in the flame arrestor.

3.Reassemble following the procedure under the “Replacing the Burner Door Assembly” section.

22

Page 21 Page 23
Page 22
Image 22
Kenmore 153.33097, 153.33096 owner manual Replacing the Thermocouple, External Inspection & Cleaning of the Flame Arrestor
Page 21 Page 23

153.33097, 153.33096 specifications

Kenmore has long been a trusted name in home appliances, and their washer models 153.33096 and 153.33097 are no exception. These machines stand out for their modern features, advanced technology, and user-friendly characteristics that cater to the needs of today’s households.

One of the main features of both models is their efficient cleaning performance. The machines are equipped with a powerful wash system that ensures thorough dirt and stain removal, even from heavily soiled fabrics. The dual-action agitator in each model enhances the washing process by allowing optimal movement of laundry, resulting in cleaner clothes in less time.

In terms of capacity, the Kenmore 153.33096 and 153.33097 offer a generous wash drum size, accommodating large loads. This is particularly convenient for families or individuals who do laundry less frequently. The higher capacity not only saves time between cycles but also reduces water and energy consumption, making these washers environmentally friendly options.

The models feature various wash cycles and temperature settings to suit different fabric types and soiling levels. Users can select from options like delicate, heavy-duty, and quick wash cycles, providing flexibility for various laundry needs. This versatility is further enhanced by the inclusion of a digital display and intuitive controls, making it easy to customize each wash.

Another key characteristic of the 153.33096 and 153.33097 is the incorporation of advanced technology. The machines utilize a smart sensor system that detects load sizes and automatically adjusts water levels accordingly. This feature not only conserves water but also ensures optimal cleaning performance for every load.

Noise reduction technology is also a significant advantage of these Kenmore models. Using advanced sound-dampening materials, they operate quietly, making them a desirable choice for any household, especially in open-plan living spaces.

In summary, the Kenmore 153.33096 and 153.33097 washers are exemplary products that combine performance, efficiency, and user-friendly design. With their robust features, advanced technologies, and thoughtful characteristics, they deliver an exceptional laundry experience that meets the demands of modern life. Whether you're dealing with everyday laundry or specialized items, these Kenmore models offer tailored solutions to ensure outstanding cleanliness and convenience.
Top Page Image Contents