Kenmore 1947, 1660, 1357 manual Caring for the Machine, Cleaning and Oiling

CARING FOR THE MACHINE.........

.............................. _ ...............______,_._._,__

CLEANING AND OILING

Fig, 1 Cleaning the feed dogs with a brush.

To insure the best possible operation

of your-machine,it is necessary to

	keep the essential parts	clean at all
	times. Using a small brush, remove
Fig. 1	the lint that accumulates in the shuttle
	area and around the feed	dogs.

Fig. 2 Parts of the Shuttle Assembly

-ToClean the Shuttle Area:

ShU_ Sly

Shuttle Race Cover

i:il- !

pointed._.,.

hook"

Shuttle

=This area must be kept free of dust, lint and occasional tangled thread. Raise the needle bar to its highest point and remove the bobbin case.

2.Push levers of shuttle race aside and lift shuttle race cover and shut- tle out.

3.Clean the shuttle race with small brush.

4.Put a drop of oil on the center pin

of the shuttle and shuttle race. (see arrows)

To Replace Shuttle Assembly:

1.Position shuttle race as illustrated so

that shuttle driver is forming half moon on the left side of the

machine.

,Hold shuttle by center pin and position shuttle so as to form a half

moon on the right side. Pointed hook will be on the bottom.

. Place shuttle race cover into place

over shuttle assembly.

Shuttle Race

Fig. 2

44