Kenmore 22-45262 specifications Inch Manual-Clean Electric Coil Drop-Ins, White, Two oven racks

30-Inch Manual-Clean Electric Coil Drop-Ins

22-45262

page 1 of 1

22-45262 – White

◗ 4.2 cu. ft. manual-clean porcelain oven

◗ Two oven racks

◗ Two 8" @ 2,600W and two 6" @ 1,500W

Selection
	White	22-45262
	Oven Features
	Cleaning System	Manual-Clean
	Oven Capacity (cu. ft.)	4.2
	Electronic Oven Controls	Easy Set™ 105
	Advanced Baking System	Dual Radiant™
	Variable Broiling System	Hi/Lo
	Total Adjustable Oven Racks	2
	Oven Light	●
	Removable Glass Door	●
	Window	●
	Oven Interior WxHxD (Inches)	24 1/8 x
		16 1/2 x 18 1/32
	Cooktop Features
	Cooktop Elements	Coil
	8-in. (Watts)	2 @ 2,600
	6-in. (Watts)	2 @ 1,500
	Dishwasher-Safe Knobs	●
	Cooktop Surface	Porcelain
	Removable Drip Pans	Porcelain
	Lift-up Cooktop	●
	Cooktop On Indicator Lights	2

General Features
	Power Rating (kW) @ 240V/208V		11.2/8.4
	Bake/Broil @ 240V Watts)		3,000/2,750
	Bake/Broil @ 208V (Watts)		2,253/2,065
	Breaker/Copper Wire Size (240V)*		40/8
	Shipping Weight (Approx. Lbs.)		132
	Accessories
	Optional Backguard†	White	22-628-
			903046-9011
	Optional Side Trim Kit†	White	22-628-
			903045-9101
	Optional Bottom Trim Kit†	White	22-628-
			903068-9011
	Optional Rear Top Filler Kit	White	22-628-
			901193-9011
	Warranty
	1-Year Limited Warranty –
	Entire Appliance		Parts & Labor

If used for other than private family purposes, warranty applies for only 90 days.

*Always consult local and national electrical codes †Call Sears Parts 1-866-732-7728

coil elements with porcelain drip pans

◗ Easy Set™ 105 electronic oven controls

◗ Lift-up porcelain cooktop

				Door/				Measure First!
								When replacing slide-in or drop-in
Model	Overall	Console	Controls	Drawer	Handle	Surface	Drip Pans
22-45262	White	White	White	White	White	White	Lt. Grey	ranges, be sure to confirm cut-out
								dimensions. Cut-out dimensions
								vary by model.

30" Min.

Shave Raised Edge

To Clear 31-1/2"

Wide Cooktop Rim.

30" Min.*

Min. 3/4"

COUNTERTOP PREPARATION

The cooktop sides of the range fit over the cutout edge of your countertop. Countertop must be level.

Locate Cabinet Doors 1" Min. from Cut-Out Opening

	18" Min.
31 1/2"	30"†
	±1/16"
Exact
21 3/4"
29" min.**	Approx. 1 7/8"
22 1/8"
max.

24" Min.

cutout
width	Formed or tiled
31 1/2"
	countertop
	trimmed 3/4" back
3/4"	at front corners of
	countertop opening.

If you have a square finish (flat) countertop, no countertop preparation is required. Cooktop sides lay directly on edge of countertop.

Formed front-edged countertops must have molded edge shaved flat 3/4" from each front corner of opening.

Tile countertops may need trim cut back 3/4" from each front corner and/or rounded edge flattened.

If the existing cutout width is greater than 30 1/16", reduce the 3/4" dimension.

NOTE: For 29" cutout wide

opening, you must call the Sears Service Center for optional side panels and clear wide cooktop rim.

Grounded Junction Box in adjoining cabinet

Do not pinch the power supply cord between the range and the wall. Do not seal the range to the side cabinets.

*Note: 24" min. clearance between the cooktop and the bottom of the cabinet when the bottom of the wood or metal cabinet is protected by not less than 1/4" flame retardant millboard covered with not less than No. 28 MSG sheet metal, 0.015" stainless steel, 0.024" aluminum, or 0.020" copper. 30" min. clearance when the cabinet is unprotected.

**Note: Minimum cutout depth is increased to 24" with optional backguard.

†Note: To avoid cooktop glass breakage for cutout width of more than 30 1/16", make sure appliance is centered in the counter opening while pushing into it.

††For cutouts below 22 7/8”, appliance will slightly show out of the cabinet. +Allow at least 20" clearance for door depth when it is open.

CABINET FRONT

227/8" min.††

231/4" max.

1 1/8"

21 3/4" min.

22 1/8" max.

28 5/16" 31 1/2"

21 3/4"

29 3/8"

Door Open+

Side Panel

30"

07806

Because of our continuous program of product improvement, Sears reserves the right to change materials and specifications without notice. Consult installation instructions packed with the product for final dimensional data. For complete warranty information, contact your local Sears Contract Sales Account Manager.

All ranges are equipped with an Anti-Tip device. The installation of this device is an important, required step in the installation of the range.

22-45262.PDF

Effective 05/31/06 Rev. 1