DOOR REMOVAL / REVERSAL INSTRUCTIONS
CAUTION
Wear gloves and use extreme CAUTION when installing these handles.The rounded end of the handles may be sharp.
IMPORTANT
To ensure proper installation of handles, please review these instructions and pictures thoroughly prior to installing the handles.
Additionally, before installing the door handles, make sure the door swing is correct. Follow instructions in the Use & Care Guide to reverse the doors, if necessary.
TO ATTACH REFRIGERATOR HANDLE:
1.Place rounded part of handle onto shoulder screw on face of door and align the 2 holes in top of handle with the 2 holes in top of door. Handle should be mounted with set screw facing towards center of door. Do not tighten the set screw yet.
2.Install the 2 screws into the top of the handle.
3.Tighten the set screw on the rounded part of the handle until the handle is flush with the door, then tighten another 1/2 turn.
ENGLISH
TO ATTACH FREEZER HANDLE:
1.Place rounded part of handle onto shoulder screw on face of door and align the 2 holes in bottom of handle with the 2 holes in bottom of door. Handle should be mounted with set screw facing towards center of door.Do not tighten the set screw yet.
2.Install the 2 screws into the bottom of the handle.
3.Tighten the set screw on the rounded part of the handle until the handle is flush with the door, then tighten another 1/2 turn.
TO REVERSE REFRIGERATOR/FREEZER HANDLES:
Handles may be easier to reverse while doors are off. Reverse freezer and refrigerator handles as shown.
Handle Reversal
10