LOOKING INSIDE
CAUTION
To avoid personal injury or property damage, handle tempered glass shelves carefully. Shelves may break suddenly if nicked, scratched, or exposed to sudden temperature change.
SHELF ADJUSTMENT
Refrigerator shelves are easily adjusted to suit individual needs. Before adjusting the shelves, remove all food.
To adjust sliding shelves:
1Remove shelf by pulling forward to stop position.
2Lift front edge up and pull out.
Replace the shelf on any pair of rails by reversing this procedure.
DOOR STORAGE
Door bins, shelves, and racks are provided for convenient storage of jars, bottles, and cans. Frequently used items can be quickly selected.
Some models have door racks or bins that can accommodate
The dairy compartment, |
| |
which is warmer than the |
| |
general food storage section, |
| |
is intended for short term | Door Rack | |
storage of cheese, spreads, | ||
| ||
or butter. |
|
ADJUSTABLE DOOR BINS
Some models have adjustable door bins that can be moved to suit individual needs.
Sliding Glass Shelf | Sliding Wire Shelf |
To adjust cantilever shelves:
NOTE
Cantilever shelves are supported at the back of the refrigerator. Cantilever shelves are available in either glass or wire.
1Lift front edge up.
2Pull shelf out.
To move door bins
1.Lift bin straight up.
2.Remove bin.
3.Place bin in desired position.
4.Lower bin onto supports until locked in place.
Adjustable
Door Bin
Bin | Liner |
| |
| models) |
(Some | |
ENGLISH
Replace the shelf by inserting the hooks at rear of the shelf into the wall bracket. Lower the shelf into the desired slots and lock into position.
SpillProofTM glass shelves (some models) catch and hold accidental spills. In some models, the SpillProofTM shelves slide out for easy access to food and for fast cleaning. The shelves slide out independently of the cantilever brackets. Just pull the front of the shelf forward. The shelf can be extended as far as the stopper will allow but it is not removable from the cantilever bracket.
TALL BOTTLE RETAINER (SOME MODELS)
The Tall Bottle Retainer keeps tall containers in the bin from falling forward when opening or closing the refrigerator door. To install, hold the retainer at the top, and slide it over the outside wall of the bin, as shown in the diagram. The Tall Bottle Retainer works best with a Bin Snugger.
Tall Bottle Retainer (left) and Bin Snugger (right)
Full Width Cantilever | Cantilever Glass Shelf |
Glass Shelf | Fixed and Sliding |
13
