WATER DISPENSER
Your refrigerator includes an automatic water dispenser on the front of the refrigerator door. The dispenser is designed to accommodate containers up to 71/2inches high.
r
Dispensing Water
To operate the water dispenser, hold a drinking glass against the back of the dispenser under the spout and press the "Water" button. Hold the glass as far in as possible, ensuring that the water dispensing spout is inside the lip of the glass.
To stop dispensing water, release the "Water" button and pull the glass away from the dispenser. For colder water, first add ice to your drinking glass.
The Filter Reset indicator light above the button will light up
each time the Water button is used. The following filter light indications are:
Green The filter is still operating within its specified life cycle.
Amber The filter has reached approximately 80% of its useful life. This is the recommended time to
purchase a replacement filter.
Red The filter is 100% used up. Change the filter as soon as possible.
After the filter cartridge has been changed, press and hold the Filter Reset button for
Dispenser Lock
The water dispenser includes a "Lock" button that allows you to disable the water dispenser. You can use this lock to prevent accidental spills, such as those caused by children pressing the dispensing button without a glass.
To Lock Out Press the LOCKTouch Pad
To Unlock Press the LOCK Touch Pad for
until the Red light above the Touch Pad goes out.
Press for water
How the Water Dispenser Works
The water tank, located inside the refrigerator door, automatically fills as water is dispensed. For proper dispenser operation, the recommended supply water pressure should fall between 30 psi and 1O0 psi.
Water pressure must not exceed 100
Ibs. Excessive pressure may cause water filter to malfunction.
After the refrigerator is connected to the water supply, fill the water tank by drawing one glass of water. It may take about 11/2minutes after activating the dispenser button before water begins to fill this first glass. Continue flushing the system for 3 minutes to rid the tank and plumbing connections of any impurities.
14
