Kenmore 25344723104 DOOR REMOVAL if door must be removed, Temperature Control, iNTERiOR LiGHTiNG

DOOR REMOVAL

if door must be removed :

1.Gently lay refrigerator on its back, on a rug or blanket.

2.Remove two base screws and base panel.

3.Remove bottom hinge screws.

4.Remove plastic top hinge cover.

5.Remove screws from top hinge.

6.Remove top hinge from cabinet.

7.Remove door and bottom hinge from cabinet.

8.To replace door, reverse the above order and securely tighten all screws to prevent hinge slippage.

COOL DOWN PERIOD

For safe food storage, allow 4 hours for the refrigerator to

cool down completely. The refrigerator will run continuously for the first several hours.

TEMPERATURE CONTROL

The temperature control is located inside the refrigerator

compartment. The temperature is factory
preset to provide satisfactory food storage
temperatures. However, the temperature
control is adjustable to provide a range of
temperatures for your personal satisfaction.
If a colder temperature is desired, turn the
temperature control knob toward COLDEST
and allow several	hours for temperatures to
stabilize between	adjustments.	Cold Control

iNTERiOR LiGHTiNG

The lights comes on automatically when the door is opened. To replace the light bulb, turn the temperature control to OFF and unplug the electrical cord. Replace the old bulb with a bulb of the same wattage.

ADJUSTABLE iNTERiOR

SHELVES

Multi-position adjustable interior shelves can be moved to any position for larger or smaller packages. The shipping spacers that stabilize the shelves for shipping may be removed and discarded.

Adjustable Interior Shelves - Upright Models

TO ADJUST CANTILEVER SHELVES

Lift front edge up.

Pull shelf out.

Replace the shelf by

inserting the hooks at rear of the shelf into the wall

bracket. Lower the shelf into the desired slots and lock into position.

MiD LEVEL LiGHTiNG

The lights come on automatically when the door is opened. To replace the light bulb, turn the temperature control to OFF and unplug the electrical cord. Remove the lens from the lamp housing by unsnapping it from the lamp housing using your fingers or a screwdriver. Be careful not to break the locking tabs on the lamp housing. Replace the old bulb with a bulb of the same type and wattage. To replace the lens, snap one side of the lens opening to the

tab on the lamp housing. Then carefully attach the other side.

To Remove Light Lens	_b,_,
Press Tabs
in Direction Shown.

Mid Level Lighting

o/ \o

!o,

DOOR STORAGE

Door bins, shelves, and racks are provided for convenient storage of jars, bottles, and cans. Frequently used items can be quickly selected.

Some models have door racks or bins that can accommodate

gallon-sized plastic drink containers and economy-sized jars and containers.

The dairy compartment, which is warmer than the general food storage section, is intended for short term storage of cheese, spreads, or butter.